QR Code

Dynamic & Static Finite Element Analysis Of Non-Uniform Cross-Section Functionally Graded Composite Beam Subjected To Thermo-Mechanical Loading

Main Author:	Mathews, John George
Format:	Book
Published:	♭2018.
Subjects:	Dissertations, academic -- > Engineering BMEGI Mechanical Engineering
Online Access:	http://intilib.intimal.edu.my/equip-intin/custom/home.jsp

Similar Items

Behaviour of Recycled Plastic Composite Structures for Sleeper Replacement of Railway Turnout Section.
by: Ooi Pei Jun
Published: (2018)

Development Of An Integrated Modal Analysis Application Methodology For Base Pan Finite Element Model Validation
by: THomas, Tan Siang Yaw

Investigation og the Behaviour of a cylindrical pressue vessel by using finite element method (FEM)
by: Tan Wai Hong
Published: (2018)

Overfit Prevention of Human Motion Data By Artificial Neural Network
by: Low, Kim Yap

Reduction of Downtime of The Durville Die Casting Machine at Enkei (M) Sdn. Bhd. MACI Production Plant Line A, Using Total Productive Maitenance (TPM) and Condition-Based Maintenance (CBM) Approach
by: Nelson, David Bassey

A Study On Microbial Fuel Cell (MFC) to Power Underwater Monitoring Device
by: Saravanan, Ravichanthiran

Performance Evaluation and Optimisation Of Advanced Cyclone System For Palm Waste Induced Flue Gas
by: Naresh, Kumar Uthman Kumaran

Phosphorus Removal by Electric ARC Furnace Steel Slag Adsorption
by: Lee Kah Fei

Computational Analyses of Laboratory Scale Fire Whirls With A Ring Pan
by: Lim, Wen Cong

Determination of the Hardness Distribution Pattern Obtained by Nitriding With Plasma Focus Device
by: Ng, Chee An

Determination of the Variation Of Nitrogen Pressure on The Surface Hardness Obtained by Nitriding Steel in Plasma Focus Device
by: Ng, Xue Yinn

An invstigation On The Performance and Edmission Of Gas Turbine Running On Syngas
by: Hassan, Ahsham

Study On Operating Factors and Performance of Supercharged Compressed Natrual Gas Engine Via Artificial Neural Network
by: Kee, Jian Fa

Investigation Of Cooling In The Air Conditioning Room Working Concurrently with AIr Discharge And Air Inlet System
by: Lee, Seng Joe

An Innovative Hybrid Steam-Microwave Sterilization of Palm Oil Fruits at Atmospheric Pressure
by: Nelson, David Bassey
Published: (2018)

Research on Vinyl Material Discoloration Due to UV Exposure
by: Kan, Ming Hong
Published: (2019)

Investigation on small pumped storage installations for load balancing and back-up water storage application
by: Sean Michael Moore Flynn
Published: (2015)

Effect of cross-sectional area of reinforcement on ultimate shear strength of RC deep beams
by: Farooq, Mustafa Al-Obaidi 2016

BS6399 Part 3 1988 loading for buildings : code of practice for imposed roof loads.
Published: (1988)

BS6399 Part 2 1997 loading for buildings : code of practice for wind loads.
Published: (1997)

Finite element methods : an introduction
by: Huston
Published: (1984)

BS4978 : 1996 specification for visual strength grading of softwood.
Published: (1996)

BS5400 Part 9 1983 section 9.2 steel, concrete and composite bridges : part 9 bridge bearings : section 9.2 specification for materials, manufacture and installation of bridge bearings.
Published: (1983)

BS5400 Part 9 1983 section 9.1 steel, concrete and composite bridges : part 9. bridge bearings : section 9.1 code of practice for design of bridge bearings.
Published: (1983)

BS4 Part 1 1993 structural steel sections : specification for hot-rolled sections.
Published: (1993)

Computational fluid dynamics simulation of fire whirl using methanol fuel
by: Koh Wee Liang
Published: (2014)

Evaluation of thermal comfort in selected experimental laboratories using computational fluid dynamics
by: Jim Yang Yexin
Published: (2014)

Exergy analysis on simple Brayton cycle and regenerative Brayton cycle
by: Chow Yip Jane
Published: (2014)

Heat transfer analysis of laboratory scale reactor of fast pyrolysis fluidised bed
by: Tan Yong Sin
Published: (2015)

Computational fluid dynamics simulation of laboratory scale reactor of fast pyrolysis fluidized bed
by: Tan Zhong Jian
Published: (2015)

Comparison of year round energy performance with different ventilation methods for ACMV systems in the tropics
by: Ivan Ng Wen Xiong
Published: (2015)

The evaluation of design guidelines for stratum ventilation in the tropics
by: Liew Hui Jin
Published: (2015)

Investigation of the ageing behavior of as-cast A356 aluminum alloy with strontium-addition
by: Tan Zhi Zhong
Published: (2015)

Work methods for packaging line for the butterfly extension dining set at Latitude Treefurniture Sdn. Bhd
by: H'ng Jia Yun
Published: (2015)

Prediction of energy consumption in Malaysia using statistical method
by: Yap Jun Yen
Published: (2015)

A study on a real case indoor thermal environment installed with an under-floor air distribution system in the tropics
by: Lai Chien Sin
Published: (2015)

Resolution to walls surfaces condensation and mould growth issues in An 24-hours air conditioned room
by: Ker De Kuan
Published: (2015)

Resolution to walls surfaces condensation and mould growth issues in An 24-hours air conditioned room
by: Cheah Yee Hong
Published: (2015)

Resolution to walls surfaces condensation and mould growth issues in a 24-hours air conditioned room
by: Loh U-Jo
Published: (2015)

Countermeasure for mould growths in operation theatre
by: Teoh Yan Heng
Published: (2015)