|
|
|
|
LEADER |
02560cam a2200289 7i4500 |
001 |
0000054759 |
005 |
20230721090000.0 |
008 |
180823 Eng |
040 |
|
|
|a TSAM Library
|
090 |
0 |
0 |
|a TJ145
|b IBR 2018
|
100 |
1 |
1 |
|a Ibrahim, Abu Bakar
|
245 |
1 |
0 |
|a Investigation on the Effect of Compaction and Compressive Strength of Clllayey Soil Using Glass Fiber
|c Ibrahim Abu Bakar.
|
264 |
|
0 |
|a Nilai:
|b INTI International University,
|c January 2018.
|
264 |
|
1 |
|a ♭2018.
|
300 |
|
|
|a x, 65:
|b ill.;
|c 30 cm.
|
336 |
|
|
|a text
|2 rdacontent
|
337 |
|
|
|a unmediated
|2 rdamedia
|
338 |
|
|
|a volume
|2 rdacarrier
|
500 |
0 |
0 |
|a BCEGI 51
|
500 |
0 |
0 |
|a BEng (Hons) in Civil Engineering Jannuary 2018
|
501 |
0 |
0 |
|a FEQS-CIVIL 2018
|
501 |
0 |
0 |
|a Construction or roads and other civil engineering structures on a loose or soft soil is risky due to its high compressibility, low shear strength, and high permeability. In such situations, it is general practice to modify the soil properties by blending with different materials such as lime, cement and fly ash or by reinforcing the soil. The soil that was used for this research was classified as clay soil and the stabilizer used is Glass fiber. The optimum moisture content of the clay with and without glass fiber was found. Clay with glass fiber had higher Optimum moisture content compared to the virgin soil. Virgin soil OMC was 13.7% and soil with Glass fiber 1%, 2.5%, 4% and 5% had 14%, 14.9%, 15.9% and 16.3% of OMC. Whereas the dry density of the soil increase as the glass fiber was added into the soil. Dry Density of virgin soil was 1.87 g/cm3and for soil with glass fiber 1%, 2.5%, 4% and 5% had 1.84 g/cm3, 1.77 g/cm3, 1.76 g/cm3and 1.72 g/cm3. The compressive strength was also tested and soil with glass fiber showed decent increase in stress compared to the virgin soil.Compressive Stress for virgin soil was 396.24 and for soil with Glass fiber 1%, 2.5%, 4% and 5% was tested to be 539.34, 732.54, 840.69 and 886.20. It can be concluded that glass fiber can be used on construction sites as a mode of soil stabilizer and to improve its strength.
|
502 |
0 |
0 |
|a Being a project report submitted to INTI International University as a requirements for Bachelor Of Engineering (Hons) in Civil Engineering January 2018 under the managment and supervision of Faculty of Engineering & Quantity Surveying, INTI International University
|
650 |
0 |
0 |
|a Dissertations, academic --
|x Engineering
|
650 |
0 |
0 |
|a Civil Engineering
|
650 |
0 |
0 |
|a BCEGI
|
856 |
|
|
|u http://intilib.intimal.edu.my/equip-intin/custom/home.jsp
|