Cover Image

QR Code

A study on the performance of plug-in hybrid electric vehicles

Main Author:	Saleh Othman Juma Mohammed
Format:	Book
Published:	Nilai: INTI International University, August 2014.
Subjects:	Electric automobiles Hybrid electric cars BMEGI Dissertations, academic -- > Engineering

Similar Items

A study on the performance of parallel hybrid vehicles
by: Lee Chee Yong
Published: (2014)

Design of hydraulic hybrid retrofit for heavy vehicles
by: Ng Chee Ek
Published: (2013)

Close system hybrid power plant : Eugene Tan Kai Yang.
by: Eugene Tan Kai Yang
Published: (2014)

An Innovative Hybrid Steam-Microwave Sterilization of Palm Oil Fruits at Atmospheric Pressure
by: Nelson, David Bassey
Published: (2018)

Micro air vehicle : flight control analyses
by: Neo Yeung Tat
Published: (2014)

Investigation of the effect of different process parameters in wire-EDM for aerospace materials
by: Owais Maqbool Brohi
Published: (2014)

An invstigation On The Performance and Edmission Of Gas Turbine Running On Syngas
by: Hassan, Ahsham

Automotive electrical equipment
by: KOHLI
Published: (1983)

Automotive electrical and electronic systems
by: DERATO
Published: (1994)

Study On Operating Factors and Performance of Supercharged Compressed Natrual Gas Engine Via Artificial Neural Network
by: Kee, Jian Fa

Phosphorus Removal by Electric ARC Furnace Steel Slag Adsorption
by: Lee Kah Fei

Comparison of year round energy performance with different ventilation methods for ACMV systems in the tropics
by: Ivan Ng Wen Xiong
Published: (2015)

Performance Evaluation and Optimisation Of Advanced Cyclone System For Palm Waste Induced Flue Gas
by: Naresh, Kumar Uthman Kumaran

A Study On Microbial Fuel Cell (MFC) to Power Underwater Monitoring Device
by: Saravanan, Ravichanthiran

A study on a real case indoor thermal environment installed with an under-floor air distribution system in the tropics
by: Lai Chien Sin
Published: (2015)

Computational fluid dynamics simulation of fire whirl using methanol fuel
by: Koh Wee Liang
Published: (2014)

Evaluation of thermal comfort in selected experimental laboratories using computational fluid dynamics
by: Jim Yang Yexin
Published: (2014)

Exergy analysis on simple Brayton cycle and regenerative Brayton cycle
by: Chow Yip Jane
Published: (2014)

Heat transfer analysis of laboratory scale reactor of fast pyrolysis fluidised bed
by: Tan Yong Sin
Published: (2015)

Computational fluid dynamics simulation of laboratory scale reactor of fast pyrolysis fluidized bed
by: Tan Zhong Jian
Published: (2015)

The evaluation of design guidelines for stratum ventilation in the tropics
by: Liew Hui Jin
Published: (2015)

Investigation of the ageing behavior of as-cast A356 aluminum alloy with strontium-addition
by: Tan Zhi Zhong
Published: (2015)

Work methods for packaging line for the butterfly extension dining set at Latitude Treefurniture Sdn. Bhd
by: H'ng Jia Yun
Published: (2015)

Prediction of energy consumption in Malaysia using statistical method
by: Yap Jun Yen
Published: (2015)

Resolution to walls surfaces condensation and mould growth issues in An 24-hours air conditioned room
by: Ker De Kuan
Published: (2015)

Resolution to walls surfaces condensation and mould growth issues in An 24-hours air conditioned room
by: Cheah Yee Hong
Published: (2015)

Resolution to walls surfaces condensation and mould growth issues in a 24-hours air conditioned room
by: Loh U-Jo
Published: (2015)

Countermeasure for mould growths in operation theatre
by: Teoh Yan Heng
Published: (2015)

Overfit Prevention of Human Motion Data By Artificial Neural Network
by: Low, Kim Yap

Reduction of Downtime of The Durville Die Casting Machine at Enkei (M) Sdn. Bhd. MACI Production Plant Line A, Using Total Productive Maitenance (TPM) and Condition-Based Maintenance (CBM) Approach
by: Nelson, David Bassey

Computational Analyses of Laboratory Scale Fire Whirls With A Ring Pan
by: Lim, Wen Cong

Determination of the Hardness Distribution Pattern Obtained by Nitriding With Plasma Focus Device
by: Ng, Chee An

Determination of the Variation Of Nitrogen Pressure on The Surface Hardness Obtained by Nitriding Steel in Plasma Focus Device
by: Ng, Xue Yinn

Development Of An Integrated Modal Analysis Application Methodology For Base Pan Finite Element Model Validation
by: THomas, Tan Siang Yaw

Dynamic & Static Finite Element Analysis Of Non-Uniform Cross-Section Functionally Graded Composite Beam Subjected To Thermo-Mechanical Loading
by: Mathews, John George

Investigation Of Cooling In The Air Conditioning Room Working Concurrently with AIr Discharge And Air Inlet System
by: Lee, Seng Joe

Investigation og the Behaviour of a cylindrical pressue vessel by using finite element method (FEM)
by: Tan Wai Hong
Published: (2018)

Behaviour of Recycled Plastic Composite Structures for Sleeper Replacement of Railway Turnout Section.
by: Ooi Pei Jun
Published: (2018)

Research on Vinyl Material Discoloration Due to UV Exposure
by: Kan, Ming Hong
Published: (2019)

Investigation on indentation creep performance of carbon nanotubes reinforced tin-58bismuth composites
by: Tan Chin Keat
Published: (2015)